Sprint SS problems
For about 2 wks keeps shutting sown. Veriflame indicates flame failure. Shut it down, hit all the resets, comes back up. Several times a day tp
View Articleemergency stop seems to be stuck in, help!
Hi I have a diamondback, all was going well until I hit the emergency stop and now the machine wont move back into the right position and keeps saying pin down proximity help thanks Michelle
View ArticleQuartz flash height
What is the ideal distance from a red chili quartz flash (bulbs) to the surface of the shirt? I have been told that they cure best with more air space, is this correct? I know different shirts /...
View ArticleEmployee Break Periods - what do you offer?
Hi just wanted to get some info on how other shops handle employee break periods. We run a 9-6 work day in production with two paid 15 minute breaks and an hour for lunch off the clock. Just wondering...
View ArticleSpeeding Up Flash Process
We are currently using a standard infrared unit. Does anyone know of anything out there that will speed us up? Quartz is not alan option as we do not have 3-Phase capability.
View ArticleGauntlet RS not indexing
When we hit reset, the ram moves forward fine but will not retract. The error states no index pressure, Index start proximity. Any help would be appreciated.
View Article95 Challenger Series 1
What is the CFM and PSI required for 10 Color CH20x22 press? Thoughts on best brand/ type of compressor for press? Thanks in Advance.
View ArticleC200H BAT09 or BAT08?
Which battery is supposed to be used in a 95 Challenger Omron C200H CPU? The BAT09 (3.0V) is listed in the owners manual. The BAT08 (3.6V) is listed in parts dept for M&R as being the replacement?...
View ArticleForums Registration Problems Resolved
Some of you may have had problems registering for the forums over the past few days. We had some trouble with the registration system that allowed spam-bots access to the site, so we had to shut it...
View ArticleHow to do screenprinting on t shirts at home?
Has anyone done this that can give some advice or knows how to do it? Just thought it would be awesome to make my own designs on t shirts. Thanks in advance.
View ArticleMaintenance Tank Chip Reset
Lately, for whatever reason, we've had to start resetting our maintenance tank chip differently than the on screen instructions on the HMI. Normally, you power off just the printer and then go to the...
View ArticleGauntlet 3 help needed
Our shop just purchased a new Gauntlet 3 about a month ago. Does anyone have any advice as far as resources about press operation or tips to speed up the set-up process? The Go-to function is less than...
View ArticleHello !
Hi all, New to this forum looking forward to learning more and getting to know a few of you ? kind regards paul
View ArticleSoftRip 6.9 and Epson 7700 suddenly funkinly.
Last Tuesday my Epson 7700 (powered by W. SoftRip 6.9 for separations) started cutting off my images... not like it ran out of ink... there's a hard-line where it just decided "I don't want to do it...
View ArticleEpson 4800 Film printing issue
I have an Epson 4800 that recently started printing films that wouldn't align once complete. It seems some of the prints are stretching just a little bit, making it so that fills end up not aligning...
View ArticleNeeding owner's manual for a Gauntlet r/s
Can anyone point me in the direction I can find a manual for my machine? Thanks
View Articlecontroller Mitsubishi
The controller Mitsubishi flashing AL 92 with the I-Dot prints normally. AL 92 is this normal ?
View ArticleGauntlet r/s out of registration-HELP!!
Having issues with 8/10 Gauntlet coming off registration on every other arm it seems like, when the machine goes down, it's shifting a little and every 3rd print is off a little more, some up to a...
View ArticleCayenne D Quartz flash errors
Our Cayenne D has been giving the same errors intermittently for weeks now. AL1 & AL2. After consulting the manual and calling tech support we concluded that the IR temp sensor and/or internal fan...
View Articleblack line down side of shirt at the edge of printed image
I notice this on white shirts, so maybe it has to do with white shirt color setting. I print a smaller, maybe 4 inches or 6 inches, practice print, and it looks fine, so I size it up to its normal...
View Article